- Keying in mimolive how to#
- Keying in mimolive serial number#
- Keying in mimolive manual#
- Keying in mimolive software#
Watch the video below to see how to set up mimoLive to control your ATEM! Hit, "Create new document" and mimoLive opens your new document. Now launch mimoLive and set the document settings to match the ATEM video standard settings: Set the SDI Configuration to Single Link and hit "Save". Disable both "1080PsF On" and "Remove Field Jitter on Pause". Launch the Blackmagic Desktop Video Setup app and it should "see" your UltraStudio.Ĭlick the settings icon and set your output format to match mimoLive and the ATEM. You'll need the Blackmagic Desktop Video Software, which you can get here:Īfter download and installation, you will find the Blackmagic Desktop Video folder inside your Applications folder. You may also use another version of the UltraStudio, such as the following, but not all versions of the UltraStudio support the same capabilities.
Keying in mimolive manual#
Check your camera settings and/or manual to see what your camera is capable of.ĭon't forget to plug in the UltraStudio to power it up and then connect it to your Mac via Thunderbolt. Some cameras are limited in what formats they can send out via HDMI or SDI. Important: Your cameras must be outputting a video signal that matches the ATEM video standard set in the previous step! For example, if you set your ATEM to 1080p29.97, your cameras must be putting out 1080p29.97. Plug your cameras into the ATEM inputs and connect a monitor to the Multi-View output.
Keying in mimolive software#
When you click the icon, the ATEM Software Control app opens.Ĭlick on the gear icon in the lower left corner and set your desired video standard. Once you have your computer communicating across the network with your ATEM, the ATEM Setup app will show a new icon that launches the ATEM Software Control app. Notice that the two IP addresses are not identical, but in the same range.
In this case, I changed my network settings to be in the same range as the default ATEM settings: You want the ATEM's IP address to be in the same range as your computer's network settings. Here you can see the default network settings: With a USB connection, you should see this screen:Ĭlick on the settings icon to go to the IP settings:
If you have a recent Macbook Pro, you may need a Thunderbolt to Ethernet Adapter (pictured below) in order to connect to the ATEM. The ethernet connection is for controlling the ATEM and the USB connection is for setting the IP address on the ATEM.įor those that are new to the ATEM, I'll note here that the ATEM does not come with a power cord, nor does it have a power button!
You can connect the ATEM directly to your Mac via ethernet, or you can have them both connected to an existing network. Once installed, in your Applications folder you'll find the Blackmagic ATEM Switchers folder.īefore you launch the ATEM Setup App, power up your ATEM and connect it to your Mac via both ethernet and USB. and download the latest version of the ATEM software for OSX.
Keying in mimolive serial number#
You can download the mimoLive trial version here, , or purchase it on our website here, . If you purchased mimoLive from the DVE Store, we sent you an email with the serial number needed to activate your mimoLive software.As always, feel free to contact me at if you have any questions! When we get near the end, I'll split off into a couple of different possible workflows, so you can customize the setup for your needs. I'm going to go step-by-step through the entire process of setting up mimoLive to work with an ATEM switcher and an UltraStudio 4K or UltraStudio Mini Monitor. This tutorial is dedicated to my friend Jay Creighton, who just dived in and purchased mimoLive and an ATEM Production Studio 4K! This is a fantastic combination for someone who has a Mac and wants to be able to switch multiple cameras, add graphics, or playback pre-produced video content––plus stream and record. Using mimoLive with the ATEM switcher: Step by Step Tutorial Check out the latest tutorial on how to use the Blackmagic ATEM Mini with mimoLive
0 kommentar(er)
